Marine Engine Monitor
- Compatible with Multiple Engine Types/Brands
- Compatible with Inboard Engines Including Gas & Diesel
- Analog, or NMEA2000/J1939 Engines Supported
- Choice of 4 Traditional Gauge Styles
- Swipe Between On Screen Gauge Data Types
- Supports NMEA0183 & NMEA2000 GPS Sensors
- Easy to Configure & Setup
- Plug & Play
The Marine Engine Monitor (MEM) is a fully round, 3″ touch, plug & play engine monitor designed to be used with inboard & outboard engines.
The pre-installed software has 4 dial styles based on traditional analog style gauges, with Black, White, Silver, and Black/Silver faced options.
Swipe actions enable easy viewing of available gauges including RPM with Volts; Speed with Fuel; and a quad layout showing Volts; Fuel Level; Water Temperature; and Oil Pressure, with additional Compass Heading, Engine Hours & Trim as options on its middle dial.
An easy touch menu configuration system offers simple setup with the ability to chose from common manufacturers and engine types, with a comprehensive multi-language text based fault warning and acknowledgement system, and a series of 'hidden until lit' alarm lamps.
The fully round PCAP LCD colour display can be viewed in full sunlight and the ruggedised unit is sealed to meet IP67 standards.
- GPS Sensors
- Analog Sensors
- Cable Harnesses
|FLASH Memory||8 MB|
|RAM||32 MB SDRAM|
|Display||PCAP LCD 2.93″ Round|
|Resolution||432 x 432|
|Active Area||74.39 mm Diameter|
|Viewing Angle||70 degrees left/right/down/up|
|Brightness||850 NIT (cd/m2) Fully Sunlight Readable|
|Power Requirements||10V to 32V DC|
|Connection||(2) 12 Pin Deutsch DT04-12PA/12PB Mates with DT06-12SA/12SB respectively|
|Communications||1 x RS485, 1 X CAN Bus 2.0B (isolated)|
|Operating temperature||-30°C to +77°C|
|Storage Temperature||-30°C to +85°C|
|Degree of Protection||IP67|
|Case colour||Anthracite Grey|
|Dimensions||106mm Round x 60mm Depth|
To download a technical datasheet please complete the fields below. You will not be added to a mailing list!
MEM Product Video
The Veethree Guarantee
All Veethree products are backed up by a dedicated and highly experienced team of software engineers, ready to draw up specifications for custom software, undertake the work, test the code and deliver fully functioning products.
Fugro Survey PTE
harnTRONICS provides wiring harness assemblies, battery cables, and turn key solutions in the field of solutions to the automotive, off highway vehicle, and electronics industry; flexible to customer requirements and improving performance.
Kongsberg Maritime delivers products and systems for dynamic positioning, navigation and automation to merchant vessels and offshore installations.
The Metasystems Division of Kongsberg Maritime was searching for a programmable display that could be used to show specific sensor data that measured shaft power and torque.
Specialist Instruments Ltd
The M4 display is integral in providing a pumping operating system that delivers peace of mind and enables valuable capital equipment to be run unattended.