
Universal Engine Monitor

Key Features
- Compatible with Multiple Engine Types/Brands
- All Common Engine Parameters Shown
- All Triggered Alarms Shown
- Single, Twin or Quad Engine Display Modes
- NMEA 2000 Gateway for Transmission to Other MFDs*
- IP67 All-Round Protection
- Plug and Play Installation
- Button Operated and Touch Screen Models Available
*Gateway feature on selected displays
The range incorporates a variety of types and screen sizes from a round 3″ display to a slimline 7″ display. The software is common across the range supporting inputs from analog, J1939 and NMEA 2000 engines that can be configured via the setup menu.
The UEM software provides selectable icon based display layouts; including a comprehensive text based fault warning and acknowledgement system and a series of 'hidden until lit' alarm lamps.
Primary display options include parameters related to Engine Status and Alarms as well as Fuel Level, Rudder Angle, Trim, Depth, Speed and Heading. Data is available in several formats and measurement units.
The UEM includes a 'gateway' feature that is available on most of the displays which converts inputs (including Analog signals, J1939 and NMEA0183 for GPS) to NMEA 2000 allowing engine data to be broadcast for display on other onboard multi-function displays. Please see the Model Comparison tab for more details.
Accessory Options Include:
- Protective Cover
- Harness Cabling Selectable Options: Universal Harness (including J1939, NMEA2000 and Analog) or J1939 Only Harness
- Screen Size
- Type
- Brightness
- Data Types / Sources
- J1939
- NMEA 2000
- Analogue Inputs
- Gateway to NMEA2000
- GPS Input
- External Alarm
- Diagnostics
- J1939 DM1
- J1939 DM2
- CAN Logger
- CAN Viewer
- Display / Electrical
- Power Requirements
- Connection
- Deutsch Ports
- M12 Ports
- USB Ports
- Communications
- CANbus Ports
- Environmental / Mechanical
- Operating Temp
- Degree of Protection
- Dimensions (mm)
- R3 Universal Engine Monitor
- 3 LCD
- PCAP Touch
- 850 NIT
- 6 + TACH
- NMEA 0183
- 10-32v
- 2 x 12 pin
- -
- 1 x Type A
- 1
- -30 to +77°C
- IP 67
- 105.9 Round
- R3s Universal Engine Monitor
- 2.8 LCD
- Button
- 750 NIT
- -
- -
- 10-32v
- 1 x 12 pin
- -
- 1 x Type A
- 2
- -20 to +70°C
- IP 67
- 84.8 x 44
- C3 Universal Engine Monitor
- 3.5 LCD
- Button
- 750 NIT
- 7 + TACH
- NMEA 0183
- 10-32v
- 2 x 12 pin
- -
- 1 x Type A
- 2
- -40 to +70°C
- IP 67
- 95.2 x 95.2
- C3l Universal Engine Monitor
- 3.5 LCD
- Button
- 750 NIT
- 7 + TACH
- NMEA 0183
- 10-32v
- 2 x 12 pin
- -
- 1 x Type A
- 2
- -40 to +70°C
- IP 67
- 117 x 117
- T5 Universal Engine Monitor
- 5 LCD
- PCAP Touch
- 1000 NIT
- 1
- NMEA 0183
- 8-32v
- -
- 5
- 1 x Type A
- 2
- -20 to +70°C
- IP 67
- 133 x 94
- T7i Universal Engine Monitor
- 7 LCD
- PCAP Touch
- 800 NIT
- 1
- NMEA 0183
- 8-32v
- -
- 5
- 1 x Type A
- 2
- -30 to +60°C
- IP 67
- 181 x 124
Displayed Data If Received from the Engine and Transmission | Faults (Suspect Parameter Number) Available With Relevant Message Such As Too High/Low | |
---|---|---|
ELECTRICAL | MISCELLANEOUS | 5 Volt DC Supply Accelerator Pedal Position Air Inlet Pressure Auxiliary Temperature #1 Barometric Pressure Battery Voltage – Actual Battery Voltage – Switched Boost Pressure Coolant Level Crankcase Pressure ECU 8V DC Supply Engine Coolant Engine Coolant Pressure Engine Fuel Metering Engine Load Engine Oil Filter Differential Pressure Engine Oil Level Engine Oil Pressure Engine Oil Temperature Engine Speed Engine Speed Sensor Exhaust Temperature Fuel Level Fuel Pressure Fuel Rate Fuel Temperature Intake Manifold Temperature Navigation Based Vehicle Speed Temperature Timing Sensor Total Engine Hours Total Fuel Used Transmission Oil Pressure Transmission Oil Temperature Water In Fuel |
|
|
|
FUEL | PERCENTAGE | |
|
|
|
PRESSURE | SPEED | |
|
|
|
TIME | ||
|
||
TEMPERATURE | ||
|
Exhaust Gas Temp Fuel Temp Intake Manifold 1 Temp Transmission Oil Temp Turbo 1 Compressor Inlet Temp Turbo Oil Temp |
To download a technical datasheet please complete the fields below. You will not be added to a mailing list!
Product Video
The Veethree Guarantee
All Veethree products are backed up by a dedicated and highly experienced team of software engineers, ready to draw up specifications for custom software, undertake the work, test the code and deliver fully functioning products.