R3s – 3″ CAN Bus Display – with 2.8″ LCD
CAN Bus Display Features
The R3s CAN bus display is designed as an OEM (Original Equipment Manufacturer) product, and is not available direct to end users. It has a 2.8 inch rectangular color display with an integrated 5 button keypad. The R3s has the same bezel dimensions as standard 3-3/8″ analog gauges, allowing it to blend into a variety of dash designs seamlessly.
The QVGA color display can be viewed in full sunlight, and the unit is totally sealed and electronically extremely durable. This CAN bus display can provide system control functions and alarm functionality. It is equipped to meet the challenge of providing tough, flexible, maintenance free instrumentation in even the very harshest of environments.
Also available is our Engine Monitor standard software for Industrial and Marine, which can be pre-loaded to our displays receiving and displaying J1939 engine and transmission data, including common Tier4 parameters, with active alarms (from DM1) & NMEA 2000 data, where supported.
- 2 x CANbus Connection
- 4 x Relay Outputs
- Control Capability
- Drop in Replacement for 3″ Gauges
- IP67 All Round Protection
|CPU||Processor is Freescale iMX 286, running 454 MHz|
|FLASH Memory||128 MB NAND|
|Display||TFT LCD 2.8″|
|Resolution||320 x 240 QVGA|
|Active Area||43.2mm (H) x 57.6mm (V)|
|Viewing Angle||70/80 degrees left/right/down/up|
|Power Requirements||10V to 32V DC|
|Connection||1 x 12 pin Deutsch DT04-12P Moulded in Receptacle Mates with DT06-12A|
|Operating temperature||-20°C to +70°C|
|Storage Temperature||-30°C to +80°C|
|Degree of Protection||IP67|
|Dimensions||85mm diameter x 49mm high Bezel 96mm diameter|
To download a technical datasheet please complete the fields below. You will not be added to a mailing list!
The Veethree Guarantee
All Veethree products are backed up by a dedicated and highly experienced team of software engineers, ready to draw up specifications for custom software, undertake the work, test the code and deliver fully functioning products.
When Undheim decided to expand the 'JPOS' compact DP-0 system they were looking to add the option of a smaller user interface screen to complement its existing larger screens, and approached Veethree after seeing the T5 – 5' colour display.
harnTRONICS provides wiring harness assemblies, battery cables, and turn key solutions in the field of solutions to the automotive, off highway vehicle, and electronics industry; flexible to customer requirements and improving performance.
Kongsberg Maritime delivers products and systems for dynamic positioning, navigation and automation to merchant vessels and offshore installations.
The Metasystems Division of Kongsberg Maritime was searching for a programmable display that could be used to show specific sensor data that measured shaft power and torque.